After selecting the perfect LED mirror for your bathroom, you need to figure out how to mount it. LED mirror installation is really not that much more difficult than installing a standard mirror. Wiring is the primary problem. Therefore, we recommend hiring a qualified electrician to take care of it and mount the mirror to the wall firmly.

What should we focus on before installing a bathroom mirror?

Prior to putting the bathroom mirror in place, remember to:

• Carefully read the directions.
• Before doing anything, turn off the electricity.
• Verify that the wall can bear the weight of the mirror.
• Make sure that every component—typically screws and expansion anchors—is included in the box.

Installation Tools Required

• Drill
• Hammer
• Level Ruler & Pencil
• Screwdriver

How to Install Led Mirror in Bathroom

Install Mirrors on the Wall with Screws

The following is a brief tutorial that will assist you in installing the mirror:

1. Upon opening the box, you are required to inspect each individual component.
2. Please ensure that the corner protector remains in its current position until the installation is finished.
3. Make a note on the wall of the areas where the hooks’ centers are located by measuring them with a consistent ruler.
4. Drill four holes at the predetermined places, and then use a hammer to put wall anchors into the holes.
5. Please make use of a screwdriver in order to screw into the wall anchors.
6. Firmly attach the mirror to the wall at the desired location.
7. You should now proceed to mount the LED mirror on the wall.

All you need to do is insert the 2- or 3-prong adaptor that comes with your LED mirror into the socket. However, if you’re connecting it straight to your home’s wiring, do the following actions:

1. Ensure that you locate the lead wires by looking behind the LED mirror backplate.
2. It is imperative that the power be turned off and that the lead wires be located inside the house.
3. It is necessary to connect each mirror lead wire to the matching home lead wire based on the color of the wire.
4. It is essential that the connection points have sufficient insulation in order to ensure the safety of all individuals.

Install Mirrors on the Wall with a Hanger

You should proceed in the following manner:

1. Take the mirror out of its packaging and examine it to see whether all of the stated components are there.
2. Maintain the corner protector in place until you have completed the installation.
3. To ensure a secure attachment, use screws to attach the hanger to the wall and then twist the T screw.
4. Alternatively, you can wire the mirror up or plug it into the power socket.
5. Position the mirror so that it is securely in position on the hanger, and then hang it.
6. Rotate the T screw and then put it into the hole that is located at the bottom of the back for an additional layer of protection.

Conclusion

It’s advisable to leave electrical work to the professionals for safety reasons, particularly if you lack the expertise to fix the electrical outlet in mirror. You may now turn on your mirror and enjoy the dazzling light reflecting off of yourself!